重生子承父业txt:DOS硬盘分区
来源:百度文库 编辑:中财网 时间:2024/09/21 08:58:21
Microsoft Windows 98 Startup Menu
美国微软公司 窗口 98 启动 菜单
1: Start computer with CD-ROM support.
从光驱启动
2: Start computer without CD-ROm support.
不从光驱启动
3: View the help file.
帮助
Enter a choice: 1
进入 选择 :1
A: > FDISK
DOS硬盘分区
0-0
1页
进入FDISK界面
Your computer has a disk larger 512 MB.This version of Windows
你的计算机有一个比512MB大的磁盘,这个版本的Windows
includes improved support for large disks resultng in more efficient
包含了对大硬盘的支持,使你更高效地使用大容量驱动器,
use of disk space on large drives and allowing disks over 2 GB to be
并允许使用超过2GB
formatted as a single drive_
单一驱动器。
INPORTANT: If you enble large disk support and create any new drives on this
注意: 如果你在这个磁盘上使用了大磁盘支持并创建任何新驱动
disk you will not be able to access the new drive(s) using other operating
器,你将不能使用其它操作系统,
systems including some versions of windows 95 and windows NT, as well as
包括一些版本的Windows98与Windows NT,
earlier versions of windows and MS-DOS.In addition disk utilities that
以及更早版本的Windows与MS-DOS.
were not designed explicitly for the FAT32 tile system will not be able
此外那些不是特别为FAT32文件系统设计的磁盘工具或旧的磁
to work with this disk If you need to access this disk with other operating
盘工具将不能在这个磁盘上工作,如果你需要用其它操作系统或
systems or older disk utilites, do not enabie large drive support
旧的磁盘实用工具访问这个磁盘,请不要使用大的硬盘支持。
Do you wish to enable large disk support (Y/N)………..?[Y]
你想使用大硬盘支持吗 (是Y/N否)……………….?[是Y]
按:【Enter】键 确定
0-1
2页
Microsoft Windows98
Fixed Disk Setup Program
硬盘设置程序
(C)Copyright Microsft Corp 1983-1998
(C)版权所有微软公司,1983 —— 1998
FDISK Options
硬盘分区选项
Current fixed disk drive : 1
当前硬盘驱动器:1
Choose one of the following :
选[ze择]下面的某一项:
1:Create DOS Partition or LogicaI DOS Drive
创建[DOS道史]分区或逻辑[DOS道史]驱动器。
2:Set active partition
设置活动分区。
3:Delete partition or LogicaI DOS Drive
删除分区或逻辑DOS驱动器。
4:Display partition information
显示分区信息。
5:Change current fixed disk drive
用于改变当前设置的硬盘,该项只有在电脑中连接有双硬盘时才会出现。
Enter cboice:[ 1]
输入选择: [1]
Press ESC to exit FDISK
请按ESC退出 FDISK
1-1
3页
Create DOS Partition or Logical DOS Drive
创建[DOS道史]分区或逻辑[DOS道史]驱动器。
Current fixed disk drive: 1
当前硬盘驱动器:1
Choose one of the following:
选[ze择]下面的某一项:
1:Create Primary DOS Partition
创建主DOS 分区
2:Create Extended DOS Partition
创建扩展DOS 分区
3:Create Logical DOS Drive(s) in the Extended DOS Partition
在扩展{中文读DOS道史}分区 创建逻辑DOS 分区
Enter choice : [1]
输入选择项:【0】
输入选择:选:【1】项
Press Esc to return to FDISK Options
请按Esc 返回到FDISK 选择项。
1-2
4页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive:1
当前硬盘驱动器:1
verify Drive Integrity 00% completed
确认驱动器完整性 00% 完成。
Press Esc to retum to FDISK Options
请按ESC 返回到FDISK选项。
1-3
5页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive:1
当前硬盘驱动器:1
Do you wish to use the maximum available size for a primary DOS Partition
你希望将所有剩余磁盘空间用于创建主DOS 分区
and make the partition active (Y是/N否)………………………?[ N否]
并自动将之设为活动分区吗? 输入选择项:否。
Press Esc to retum to FDISK Options
请按ESC 返回到FDISK选项。
1-4
6页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive:1
当前硬盘驱动器:1
verify Drive Integrity 00% completed
确认驱动器完整性 00% 完成。
Press Esc to retum to FDISK Options
请按ESC 返回到FDISK选项。
1-5
7页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive: 1
当前硬盘驱动器:1
Total disk space is 6400 Mbytes <1 Mbyte = 1048576 bytes
总硬盘空间是6400用多少兆字节《1兆字节=1048576字节。
Maximum space available for partition is 6400 Mbytes <100%>
分区的最大可用空间为划分6400用多少兆字节《100%》
Enter partition size in Mbytes or percent of disk space <%> to
进入分区大小在用多少兆字节或百分之的磁盘空间的百分数《%》
Create a Primary DOS Partition…………………………………………[6400]
输入分区大小来 创建一个主DOS 分区………………………………. 【6400】
输入:【2000】
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选项
按 Enter 确认键
1-6
8页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive: 1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷标 字节 文件系统 使用
C: 1 PRI DOS 2000 UNKNOWN 31%
优先磁盘操作系统
Primary DOS Partition created
主 DOS 分区 被 创建
Press Esc to continue
按 ESC键 继续
1-7
9页
Create Extended DOS Partition
创建 扩展 DOS 分区
Current fixed disk drive: 1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷标 字节 文件系统 使用
C: 1 PRI DOS 2000 UNKNOWN 31%
优先磁盘操作系统
Total disk space is 6400 Mbytes <1 Mbyte = 1048576 bytes>
总硬盘空间是 6400 用多少兆字节 《1兆字节=1048576 字节》。
Maximum space available for partition is 4400 Mbytes <69%>
分区的最大可用空间为划分 4400用多少兆字节《69%》
Enter partition size in Mbytes or percent of disk space <%> to
进入分区大小在用多少兆字节或百分之的磁盘空间的百分数《%》
Create an Extended DOS Partition……………………..[6400]
创建 一个 扩展 DOS 分区………………………………【6400】
输入:【4400】
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选择
按 Enter 确认键
1-8
10页
Create Extended DOS Partition
创建 扩展 DOS 分区
Current fixed disk drive: 1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷标 字节 文件系统 使用
C: 1 PRI DOS 2000 UNKNOWN 31%
优先磁盘操作系统
2 EXT DOS 4400 UNKNOWN 69%
扩展磁盘操作系统
Extended DOS Partition created
扩展 DOS 分区 被 创建
Press Esc to continue
按 ESC键 继续
1-9
11页
Create Logical DOS Drive in the Extended DOS Partition
在扩展{中文读DOS道史}分区 创建逻辑DOS 分区
No logical drives defined
无已定义的逻辑驱动器
Total Extended DOS Partition size is 4400 Mbytes <1 Mbyte = 1048576 bytes
总计 扩展 DOS 分区 大小 是 4400 兆字节 1兆字节= 1048576字节
Maximum space available for logical drive is 4400 Mbytes <100%>
最大 空间 可用 为 逻辑 驱动器 是 4400用多少兆字节【100%】
Enter logical drive size in Mbytes or percent of disk space <%>…[4400]
输入逻辑驱动器容量在用多少兆字节或百分之的磁盘空间<%>…[4400]
输入:【2200】
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选择
确认:按【Enter】键
1-10
12页
Create Logical DOS Drive in the Extended DOS Partition
在扩展{中文读DOS道史}分区 创建逻辑DOS 分区
Drv Volume Label Mbytes System Usage
驱动程序扩展名 卷 标 兆字节 文件系统 使用
D: 2200 UNKNOWN 50%
Total Extended DOS Partition size is 4400 Mbytes <1 Mbyte = 1048576 bytes>
总计 扩展 DOS 分区 大小 是 4400 兆字节 1兆字节= 1048576字节
Maximum space available for logical drive is 2200 Mbytes <50%>
最大 空间 可用 为 逻辑 驱动器 是 2200用多少兆字节【50%】
Enter logical drive size in Mbytes or percent of disk space <%>…[2200]
输入 逻辑 驱动器容量在用多少兆字节 或 百分之 的 磁盘 空间 <%>…[2200]
Logical DOS Drive created ,drive letters changed or added
逻辑 DOS 驱动器 被创建,驱动器 字母 改变 或 增加
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选择
按:【Enter】键:确认
1-11
13页
Create Logical DOS Drive in the Extended DOS Partition
在扩展{中文读DOS道史}分区 创建逻辑DOS 分区
Drv Volume Label Mbytes System Usage
驱动程序扩展名 卷 标 兆字节 文件系统 使用
D: 2200 UNKNOWN 50%
E: 2200 UNKNOWN 50%
All available space in the Extended DOS Partition
全部 可用 空间 的 扩展 DOS 分区
is assigned to logical drives
都被用于 逻辑 驱动器.
Press Esc to continue
按 ESC 键 继续
1-12
14页
Set Active Partition
设置 活动 分区
Current fixed disk drive:1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷 标 兆字节 文件系统 使用
C:1 PRI DOS 2000 UNKNOWN 31%
2 EXT DOS 4400 UNKNOWN 69%
Total disk space is 6400 Mbytes <1 Mbyte = 1048576 bytes>
总硬盘空间是 6400 用多少兆字节 《1兆字节=1048576 字节》。
Enter the number of the partition you want make active………:[1]
输入你想激活的分区号………………………………………………..【1】
选择:【1】
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选择
按:【Enter】键:确认
1-13
15页
Set Active Partition
设置 活动 分区
Current fixed disk drive:1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷标 字节 文件系统 使用
C: 1 [ A ] PRI DOS 2000 UNKNOWN 31%
优先磁盘操作系统
2 EXT DOS 4400 UNKNOWN 69%
扩展磁盘操作系统
Partition 1 made active
分区 【1】被 激活
Press Esc to continue
按 ESC 键 继续
1:你必须重新启动你的系统才能使用你的设置生效。
2:你创建或改变的任何启动器都必须在你重新启动之后格式化!
3:重新引导之前关闭 Windows
按ESC键退出FDISK
2011-11-12
美国微软公司 窗口 98 启动 菜单
1: Start computer with CD-ROM support.
从光驱启动
2: Start computer without CD-ROm support.
不从光驱启动
3: View the help file.
帮助
Enter a choice: 1
进入 选择 :1
A: > FDISK
DOS硬盘分区
0-0
1页
进入FDISK界面
Your computer has a disk larger 512 MB.This version of Windows
你的计算机有一个比512MB大的磁盘,这个版本的Windows
includes improved support for large disks resultng in more efficient
包含了对大硬盘的支持,使你更高效地使用大容量驱动器,
use of disk space on large drives and allowing disks over 2 GB to be
并允许使用超过2GB
formatted as a single drive_
单一驱动器。
INPORTANT: If you enble large disk support and create any new drives on this
注意: 如果你在这个磁盘上使用了大磁盘支持并创建任何新驱动
disk you will not be able to access the new drive(s) using other operating
器,你将不能使用其它操作系统,
systems including some versions of windows 95 and windows NT, as well as
包括一些版本的Windows98与Windows NT,
earlier versions of windows and MS-DOS.In addition disk utilities that
以及更早版本的Windows与MS-DOS.
were not designed explicitly for the FAT32 tile system will not be able
此外那些不是特别为FAT32文件系统设计的磁盘工具或旧的磁
to work with this disk If you need to access this disk with other operating
盘工具将不能在这个磁盘上工作,如果你需要用其它操作系统或
systems or older disk utilites, do not enabie large drive support
旧的磁盘实用工具访问这个磁盘,请不要使用大的硬盘支持。
Do you wish to enable large disk support (Y/N)………..?[Y]
你想使用大硬盘支持吗 (是Y/N否)……………….?[是Y]
按:【Enter】键 确定
0-1
2页
Microsoft Windows98
Fixed Disk Setup Program
硬盘设置程序
(C)Copyright Microsft Corp 1983-1998
(C)版权所有微软公司,1983 —— 1998
FDISK Options
硬盘分区选项
Current fixed disk drive : 1
当前硬盘驱动器:1
Choose one of the following :
选[ze择]下面的某一项:
1:Create DOS Partition or LogicaI DOS Drive
创建[DOS道史]分区或逻辑[DOS道史]驱动器。
2:Set active partition
设置活动分区。
3:Delete partition or LogicaI DOS Drive
删除分区或逻辑DOS驱动器。
4:Display partition information
显示分区信息。
5:Change current fixed disk drive
用于改变当前设置的硬盘,该项只有在电脑中连接有双硬盘时才会出现。
Enter cboice:[ 1]
输入选择: [1]
Press ESC to exit FDISK
请按ESC退出 FDISK
1-1
3页
Create DOS Partition or Logical DOS Drive
创建[DOS道史]分区或逻辑[DOS道史]驱动器。
Current fixed disk drive: 1
当前硬盘驱动器:1
Choose one of the following:
选[ze择]下面的某一项:
1:Create Primary DOS Partition
创建主DOS 分区
2:Create Extended DOS Partition
创建扩展DOS 分区
3:Create Logical DOS Drive(s) in the Extended DOS Partition
在扩展{中文读DOS道史}分区 创建逻辑DOS 分区
Enter choice : [1]
输入选择项:【0】
输入选择:选:【1】项
Press Esc to return to FDISK Options
请按Esc 返回到FDISK 选择项。
1-2
4页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive:1
当前硬盘驱动器:1
verify Drive Integrity 00% completed
确认驱动器完整性 00% 完成。
Press Esc to retum to FDISK Options
请按ESC 返回到FDISK选项。
1-3
5页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive:1
当前硬盘驱动器:1
Do you wish to use the maximum available size for a primary DOS Partition
你希望将所有剩余磁盘空间用于创建主DOS 分区
and make the partition active (Y是/N否)………………………?[ N否]
并自动将之设为活动分区吗? 输入选择项:否。
Press Esc to retum to FDISK Options
请按ESC 返回到FDISK选项。
1-4
6页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive:1
当前硬盘驱动器:1
verify Drive Integrity 00% completed
确认驱动器完整性 00% 完成。
Press Esc to retum to FDISK Options
请按ESC 返回到FDISK选项。
1-5
7页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive: 1
当前硬盘驱动器:1
Total disk space is 6400 Mbytes <1 Mbyte = 1048576 bytes
总硬盘空间是6400用多少兆字节《1兆字节=1048576字节。
Maximum space available for partition is 6400 Mbytes <100%>
分区的最大可用空间为划分6400用多少兆字节《100%》
Enter partition size in Mbytes or percent of disk space <%> to
进入分区大小在用多少兆字节或百分之的磁盘空间的百分数《%》
Create a Primary DOS Partition…………………………………………[6400]
输入分区大小来 创建一个主DOS 分区………………………………. 【6400】
输入:【2000】
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选项
按 Enter 确认键
1-6
8页
Create Primary DOS Partition
创建主DOS 分区
Current fixed disk drive: 1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷标 字节 文件系统 使用
C: 1 PRI DOS 2000 UNKNOWN 31%
优先磁盘操作系统
Primary DOS Partition created
主 DOS 分区 被 创建
Press Esc to continue
按 ESC键 继续
1-7
9页
Create Extended DOS Partition
创建 扩展 DOS 分区
Current fixed disk drive: 1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷标 字节 文件系统 使用
C: 1 PRI DOS 2000 UNKNOWN 31%
优先磁盘操作系统
Total disk space is 6400 Mbytes <1 Mbyte = 1048576 bytes>
总硬盘空间是 6400 用多少兆字节 《1兆字节=1048576 字节》。
Maximum space available for partition is 4400 Mbytes <69%>
分区的最大可用空间为划分 4400用多少兆字节《69%》
Enter partition size in Mbytes or percent of disk space <%> to
进入分区大小在用多少兆字节或百分之的磁盘空间的百分数《%》
Create an Extended DOS Partition……………………..[6400]
创建 一个 扩展 DOS 分区………………………………【6400】
输入:【4400】
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选择
按 Enter 确认键
1-8
10页
Create Extended DOS Partition
创建 扩展 DOS 分区
Current fixed disk drive: 1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷标 字节 文件系统 使用
C: 1 PRI DOS 2000 UNKNOWN 31%
优先磁盘操作系统
2 EXT DOS 4400 UNKNOWN 69%
扩展磁盘操作系统
Extended DOS Partition created
扩展 DOS 分区 被 创建
Press Esc to continue
按 ESC键 继续
1-9
11页
Create Logical DOS Drive
在扩展{中文读DOS道史}分区 创建逻辑DOS 分区
No logical drives defined
无已定义的逻辑驱动器
Total Extended DOS Partition size is 4400 Mbytes <1 Mbyte = 1048576 bytes
总计 扩展 DOS 分区 大小 是 4400 兆字节 1兆字节= 1048576字节
Maximum space available for logical drive is 4400 Mbytes <100%>
最大 空间 可用 为 逻辑 驱动器 是 4400用多少兆字节【100%】
Enter logical drive size in Mbytes or percent of disk space <%>…[4400]
输入逻辑驱动器容量在用多少兆字节或百分之的磁盘空间<%>…[4400]
输入:【2200】
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选择
确认:按【Enter】键
1-10
12页
Create Logical DOS Drive
在扩展{中文读DOS道史}分区 创建逻辑DOS 分区
Drv Volume Label Mbytes System Usage
驱动程序扩展名 卷 标 兆字节 文件系统 使用
D: 2200 UNKNOWN 50%
Total Extended DOS Partition size is 4400 Mbytes <1 Mbyte = 1048576 bytes>
总计 扩展 DOS 分区 大小 是 4400 兆字节 1兆字节= 1048576字节
Maximum space available for logical drive is 2200 Mbytes <50%>
最大 空间 可用 为 逻辑 驱动器 是 2200用多少兆字节【50%】
Enter logical drive size in Mbytes or percent of disk space <%>…[2200]
输入 逻辑 驱动器容量在用多少兆字节 或 百分之 的 磁盘 空间 <%>…[2200]
Logical DOS Drive created ,drive letters changed or added
逻辑 DOS 驱动器 被创建,驱动器 字母 改变 或 增加
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选择
按:【Enter】键:确认
1-11
13页
Create Logical DOS Drive
在扩展{中文读DOS道史}分区 创建逻辑DOS 分区
Drv Volume Label Mbytes System Usage
驱动程序扩展名 卷 标 兆字节 文件系统 使用
D: 2200 UNKNOWN 50%
E: 2200 UNKNOWN 50%
All available space in the Extended DOS Partition
全部 可用 空间 的 扩展 DOS 分区
is assigned to logical drives
都被用于 逻辑 驱动器.
Press Esc to continue
按 ESC 键 继续
1-12
14页
Set Active Partition
设置 活动 分区
Current fixed disk drive:1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷 标 兆字节 文件系统 使用
C:1 PRI DOS 2000 UNKNOWN 31%
2 EXT DOS 4400 UNKNOWN 69%
Total disk space is 6400 Mbytes <1 Mbyte = 1048576 bytes>
总硬盘空间是 6400 用多少兆字节 《1兆字节=1048576 字节》。
Enter the number of the partition you want make active………:[1]
输入你想激活的分区号………………………………………………..【1】
选择:【1】
Press Esc to return to FDISK Options
请按ESC 返回到FDISK选择
按:【Enter】键:确认
1-13
15页
Set Active Partition
设置 活动 分区
Current fixed disk drive:1
当前 硬盘 驱动器:1
Partition Status Type Volume Label Mbytes System Usage
分区 状态 类型 卷标 字节 文件系统 使用
C: 1 [ A ] PRI DOS 2000 UNKNOWN 31%
优先磁盘操作系统
2 EXT DOS 4400 UNKNOWN 69%
扩展磁盘操作系统
Partition 1 made active
分区 【1】被 激活
Press Esc to continue
按 ESC 键 继续
1:你必须重新启动你的系统才能使用你的设置生效。
2:你创建或改变的任何启动器都必须在你重新启动之后格式化!
3:重新引导之前关闭 Windows
按ESC键退出FDISK
2011-11-12
如何在DOS中将硬盘分区
怎样在dos下硬盘分区
在dos下怎样进行硬盘分区?
如何在dos下给硬盘分区
DOS能不能支持NTFS格式的硬盘分区
在DOS下怎样将硬盘分区?
关于DOS下硬盘分区的问题
光盘,XP安装盘,DOS启动,硬盘分区
关于Win98在DOS下对硬盘分区的操作
用什么软件能不在DOS模式下能把硬盘分区
进入DOS可以直接进行格式化或硬盘分区吗
DOS下的FDISK可以对80G硬盘分区吗?
PQ8.0 DOS版最高支持多大的硬盘分区?
我用矮人DOS工具箱能不能格式化ntfs的硬盘分区?
如何用DOS格式化C盘,及硬盘分区?
硬盘分区
硬盘分区
硬盘分区???
硬盘分区!!!!!
硬盘分区
硬盘分区!
硬盘分区
硬盘分区
硬盘分区