快乐12胆拖投注金额表:从CStatic类派生自己的切分窗口类

//Splitter.h//小G, 2009.12

#pragma once

// CSplitter
class CSplitter : public CStatic{ DECLARE_DYNAMIC(CSplitter)
public: CSplitter(); virtual ~CSplitter();
protected: DECLARE_MESSAGE_MAP()public: virtual void DrawItem(LPDRAWITEMSTRUCT /*lpDrawItemStruct*/);public: void OnInvertTracker(const CRect& rect);public: int m_nSplitterWidth; //分割行数及列数，行宽及列宽 int m_nRows; int m_nColumns; int m_nCx[2]; int m_nCy[2]; HWND *m_hCtrlWnd; //最小行高及最小列宽 int m_nMinCx; int m_nMinCy; //鼠标位置指示器 int m_nCurX; int m_nCurY; //拖动虚框 BOOL m_bTracking; CRect m_rcHTrack; CRect m_rcVTrack; // bool m_bOver; bool m_bHasBtn; //public: void HiteTest(CPoint& point);public: afx_msg void OnMouseMove(UINT nFlags, CPoint point);public: afx_msg BOOL OnSetCursor(CWnd* pWnd, UINT nHitTest, UINT message);public: afx_msg void OnLButtonDown(UINT nFlags, CPoint point);public: afx_msg void OnLButtonUp(UINT nFlags, CPoint point);//public:// afx_msg void OnTimer(UINT_PTR nIDEvent);public: BOOL CreateSplitter(int nRows, int nColumns, CRect& rect, CWnd *pParentWnd, CSize szLimit = CSize(0, 0));public: void SetPaneInfo(int nRow, int nColumn, CSize sz, CWnd *pWnd = NULL);public: CWnd* GetPane(int nRow, int nColumn); void GetPanesize(int nRow, int nColumn, CRect &rect);private: void CSplitter::ReCalcSize(CRect &rcClient);public: void OnDraw();};
// Splitter.cpp : 实现文件//小G, 2009.12
#include "stdafx.h"#include "SplitterWnd.h"#include "Splitter.h"

// CSplitter
IMPLEMENT_DYNAMIC(CSplitter, CStatic)
CSplitter::CSplitter(){ m_nSplitterWidth = 7;
m_nRows = 1; m_nColumns = 1; m_nCx[0] = 0; m_nCy[0] = 0; m_nCx[1] = 0; m_nCy[1] = 0;
m_nMinCx = 0; m_nMinCy = 0;
m_hCtrlWnd = NULL;
m_nCurX = -1; m_nCurY = -1;
m_bOver = false; m_bHasBtn = true; m_bTracking = false;}
CSplitter::~CSplitter(){ for(int i = 0;i < m_nRows*m_nColumns;i ++) { if(m_hCtrlWnd[i] != NULL) ::SendMessage(m_hCtrlWnd[i], WM_DESTROY, 0, 0); }}

BEGIN_MESSAGE_MAP(CSplitter, CStatic) ON_WM_MOUSEMOVE() ON_WM_SETCURSOR() ON_WM_LBUTTONDOWN() ON_WM_LBUTTONUP() //ON_WM_TIMER()END_MESSAGE_MAP()


// CSplitter 消息处理程序


void CSplitter::DrawItem(LPDRAWITEMSTRUCT lpDrawItemStruct){ // TODO:  添加您的代码以绘制指定项 OnDraw();
//移动子窗口 CRect rc = lpDrawItemStruct->rcItem; ReCalcSize(rc); for(int i = 0;i < m_nRows;i ++) { for(int j = 0;j < m_nColumns;j ++) { if(m_hCtrlWnd[i*m_nColumns+j] != NULL) { GetPanesize(i, j, rc); ::MoveWindow(m_hCtrlWnd[i*m_nColumns+j], rc.left, rc.top, rc.Width(), rc.Height(), 1); } } }}
void CSplitter::OnInvertTracker(const CRect& rect){ ASSERT_VALID(this); ASSERT(!rect.IsRectEmpty()); //ASSERT((GetStyle() & WS_CLIPCHILDREN) == 0);
// pat-blt without clip children on CDC* pDC = GetDC(); // invert the brush pattern (looks just like frame window sizing) CBrush* pBrush = CDC::GetHalftoneBrush(); HBRUSH hOldBrush = NULL; if (pBrush != NULL) hOldBrush = (HBRUSH)SelectObject(pDC->m_hDC, pBrush->m_hObject); pDC->PatBlt(rect.left, rect.top, rect.Width(), rect.Height(), PATINVERT); if (hOldBrush != NULL) SelectObject(pDC->m_hDC, hOldBrush); ReleaseDC(pDC);}
void CSplitter::HiteTest(CPoint& point){ CRect rc; this->GetClientRect(&rc);
int nXpos = 0; int nYpos = 0;
//交叉块 for(int i = 0;i < m_nRows - 1;i ++) { nYpos += m_nCy[i]; //pDC->Rectangle(0, nTemp, rc.Width(), nTemp+m_nSplitterWidth); for(int j = 0;j < m_nColumns - 1;j ++) { nXpos += m_nCx[j]; //pDC->Rectangle(nXpos, nYpos, nXpos+m_nSplitterWidth, nYpos+m_nSplitterWidth); if(point.x>nXpos && point.xnYpos && point.yLoadCursor(IDC_CURSOR1)); m_nCurX = i; m_nCurY = j; return; } nXpos += m_nSplitterWidth; } nYpos += m_nSplitterWidth; nXpos = 0; }
//竖条 nXpos = 0; for(int i = 0;i < m_nColumns - 1;i ++) { nXpos += m_nCx[i]; //pDC->Rectangle(nXpos, 0, nXpos+m_nSplitterWidth, rc.Height()); if(point.x>nXpos && point.x rc.Height()/2-25 && point.y < rc.Height()/2+25) { ::SetCursor(::LoadCursor(NULL, IDC_ARROW)); m_nCurX = -1; m_nCurY = -2; if(!m_bOver) { m_bOver = true; OnDraw(); } return; } else { if(m_bOver) { m_bOver = false; OnDraw(); } //return; } } ::SetCursor(AfxGetApp()->LoadCursor(IDC_CURSOR2)); m_nCurX = -1; m_nCurY = i; return; } nXpos += m_nSplitterWidth; }
//横条 nYpos = 0; for(int i = 0;i < m_nRows - 1;i ++) { nYpos += m_nCy[i]; //pDC->Rectangle(0, nYpos, rc.Width(), nYpos+m_nSplitterWidth); if(point.y>nYpos && point.y rc.Width()/2-25 && point.x < rc.Width()/2+25) { ::SetCursor(::LoadCursor(NULL, IDC_ARROW)); m_nCurX = -2; m_nCurY = -1; if(!m_bOver) { m_bOver = true; OnDraw(); } return; } else { if(m_bOver) { m_bOver = false; OnDraw(); } //return; } } ::SetCursor(AfxGetApp()->LoadCursor(IDC_CURSOR3)); m_nCurX = i; m_nCurY = -1; return; } nYpos += m_nSplitterWidth; }
::SetCursor(::LoadCursor(NULL, IDC_ARROW)); m_nCurX = -1; m_nCurY = -1;}
void CSplitter::OnMouseMove(UINT nFlags, CPoint point){ // TODO: 在此添加消息处理程序代码和/或调用默认值 if(nFlags & MK_LBUTTON) { if(m_bTracking) { CRect rc; this->GetClientRect(&rc);
if(m_nCurX != -1) { OnInvertTracker(m_rcHTrack); //横条移动范围限制 if(point.y > m_nMinCy+m_nSplitterWidth/2-2 && point.y < rc.Height()-m_nMinCy-m_nSplitterWidth/2-2) m_rcHTrack.MoveToY(point.y-2); else if(point.y <= m_nMinCy+m_nSplitterWidth/2-2) m_rcHTrack.MoveToY(m_nMinCy+m_nSplitterWidth/2-2); else m_rcHTrack.MoveToY(rc.Height()-m_nMinCy-m_nSplitterWidth/2-2); OnInvertTracker(m_rcHTrack); } if(m_nCurY != -1) { OnInvertTracker(m_rcVTrack); //竖条移动范围限制 if(point.x > m_nMinCx+m_nSplitterWidth/2-2 && point.x < rc.Width()-m_nMinCx-m_nSplitterWidth/2-2) m_rcVTrack.MoveToX(point.x-2); else if(point.x <= m_nMinCx+m_nSplitterWidth/2-2) m_rcVTrack.MoveToX(m_nMinCx+m_nSplitterWidth/2-2); else m_rcVTrack.MoveToX(rc.Width()-m_nMinCx-m_nSplitterWidth/2-2); OnInvertTracker(m_rcVTrack); } } } else HiteTest(point);
CStatic::OnMouseMove(nFlags, point);}
BOOL CSplitter::OnSetCursor(CWnd* pWnd, UINT nHitTest, UINT message){ // TODO: 在此添加消息处理程序代码和/或调用默认值 if(pWnd == this) { if(m_bOver || m_nCurX != -1 || m_nCurY != -1) return true; } if(m_bHasBtn && m_bOver) { m_bOver = false; OnDraw(); }
return CStatic::OnSetCursor(pWnd, nHitTest, message);}
void CSplitter::OnLButtonDown(UINT nFlags, CPoint point){ // TODO: 在此添加消息处理程序代码和/或调用默认值 static int nOrginal = 0; HiteTest(point);
if(m_bOver) { if(m_nCurX == -2) { m_nCurX = -1; //MessageBox(L"Clicked H."); CRect rc; this->GetClientRect(&rc); if(m_nCy[0] == rc.Height()-m_nSplitterWidth-20) m_nCy[0] = nOrginal; else { nOrginal = m_nCy[0]; m_nCy[0] = rc.Height()-m_nSplitterWidth-20; } } if(m_nCurY == -2) { m_nCurY = -1; //MessageBox(L"Clicked V."); if(m_nCx[0] == 0) m_nCx[0] = nOrginal; else { nOrginal = m_nCx[0]; m_nCx[0] = 0; } } this->Invalidate(); this->UpdateWindow(); }
if(m_nCurX != -1 || m_nCurY != -1) { CRect rc; this->GetClientRect(&rc);
int nPos = -m_nSplitterWidth; if(m_nCurX != -1) { m_rcHTrack.SetRect(0, point.y-2, rc.Width(), point.y+2); OnInvertTracker(m_rcHTrack); } nPos = -m_nSplitterWidth; if(m_nCurY != -1) { m_rcVTrack.SetRect(point.x-2, 0, point.x+2, rc.Height()); OnInvertTracker(m_rcVTrack); } m_bTracking = true; //SetTimer(110, 10, NULL); //让当前窗口捕获鼠标消息 SetCapture(); }
CStatic::OnLButtonDown(nFlags, point);}
void CSplitter::OnLButtonUp(UINT nFlags, CPoint point){ // TODO: 在此添加消息处理程序代码和/或调用默认值 if(m_bTracking) { m_bTracking = false; //KillTimer(110); //停止捕获鼠标消息 ReleaseCapture();
if(m_nCurX != -1) { OnInvertTracker(m_rcHTrack); for(int i = 0;i < m_nCurX;i ++) m_rcHTrack.top -= m_nCy[i]+m_nSplitterWidth; m_nCy[m_nCurX] = m_rcHTrack.top - m_nSplitterWidth/2 + 2; } if(m_nCurY != -1) { OnInvertTracker(m_rcVTrack); for(int i = 0;i < m_nCurY;i ++) m_rcVTrack.left -= m_nCx[i]+m_nSplitterWidth; m_nCx[m_nCurY] = m_rcVTrack.left - m_nSplitterWidth/2 + 2; } HiteTest(point);
this->Invalidate(); this->UpdateData(); }
CStatic::OnLButtonUp(nFlags, point);}
//void CSplitter::OnTimer(UINT_PTR nIDEvent)//{// // TODO: 在此添加消息处理程序代码和/或调用默认值// //控制鼠标位置==================================// CRect rc;// this->GetClientRect(&rc);//// CPoint ptWnd, ptCursor;// ptWnd.SetPoint(0, 0);// ClientToScreen(&ptWnd);// ::GetCursorPos(&ptCursor);// if(ptCursor.x < ptWnd.x + m_nMinCx+m_nSplitterWidth/2+4)// ::SetCursorPos(ptWnd.x + m_nMinCx+m_nSplitterWidth/2+4, ptCursor.y);// if(ptCursor.x > ptWnd.x + rc.Width() - 2)// ::SetCursorPos(ptWnd.x + rc.Width() - 2, ptCursor.y);// if(ptCursor.y < ptWnd.y + m_nMinCy+m_nSplitterWidth/2+4)// ::SetCursorPos(ptCursor.x, ptWnd.y + m_nMinCy+m_nSplitterWidth/2+4);// if(ptCursor.y > ptWnd.y + rc.Height() - 2)// ::SetCursorPos(ptCursor.x, ptWnd.y + rc.Height() - 2);// //==============================================//// CStatic::OnTimer(nIDEvent);//}
BOOL CSplitter::CreateSplitter(int nRows, int nColumns, CRect& rect, CWnd *pParentWnd, CSize szLimit){ ASSERT(pParentWnd != NULL);
m_nRows = nRows; m_nColumns = nColumns;
m_nMinCx = szLimit.cx; m_nMinCy = szLimit.cy;
m_hCtrlWnd = new HWND[m_nRows*m_nColumns]; memset((void*)m_hCtrlWnd, 0, sizeof(HWND)*m_nRows*m_nColumns);
return this->Create(NULL, SS_NOTIFY|SS_OWNERDRAW|WS_VISIBLE|WS_CHILD, rect, pParentWnd);}
void CSplitter::SetPaneInfo(int nRow, int nColumn, CSize sz, CWnd *pWnd){ m_nCx[nColumn] = sz.cx; m_nCy[nRow] = sz.cy;
if(pWnd != NULL) { pWnd->SetParent(this); m_hCtrlWnd[nRow*m_nColumns+nColumn] = pWnd->m_hWnd; }}
CWnd* CSplitter::GetPane(int nRow, int nColumn){ return CWnd::FromHandle(m_hCtrlWnd[nRow*m_nColumns+nColumn]);}
void CSplitter::GetPanesize(int nRow, int nColumn, CRect &rect){ rect.SetRect(0, 0, 0, 0); for(int i = 0;i < nColumn;i ++) rect.left += m_nCx[i] + m_nSplitterWidth; rect.right = rect.left + m_nCx[nColumn]; for(int i = 0;i < nRow;i ++) rect.top += m_nCy[i] + m_nSplitterWidth; rect.bottom = rect.top + m_nCy[nRow];}
void CSplitter::ReCalcSize(CRect &rcClient){ m_nCx[m_nColumns - 1] = rcClient.Width(); for(int i = 0;i < m_nColumns - 1;i ++) m_nCx[m_nColumns - 1] -= m_nCx[i] + m_nSplitterWidth; m_nCy[m_nRows - 1] = rcClient.Height(); for(int i = 0;i < m_nRows - 1;i ++) m_nCy[m_nRows - 1] -= m_nCy[i] + m_nSplitterWidth;}
void CSplitter::OnDraw(){ CDC *pDC = this->GetDC(); CRect rc; this->GetClientRect(&rc);
int nXpos = 0; int nYpos = 0;
// //CPen pen; //pen.CreatePen(PS_SOLID, 1, RGB(167, 166, 170)); //CBrush brush; //brush.CreateSolidBrush(RGB(239, 237, 241)); //CPen *pOldPen = pDC->SelectObject(&pen); //CBrush *pOldBrush = pDC->SelectObject(&brush); CBitmap bitmap; bitmap.LoadBitmap(IDB_BITMAP1);
CDC compDC; compDC.CreateCompatibleDC(pDC); compDC.SelectObject(&bitmap); //
//竖条 for(int i = 0;i < m_nColumns - 1;i ++) { nXpos += m_nCx[i]; //pDC->Rectangle(nXpos, 0, nXpos+m_nSplitterWidth, rc.Height()); if(!m_bHasBtn) pDC->StretchBlt(nXpos, 0, m_nSplitterWidth, rc.Height(), &compDC, 0, 0, 7, 7, SRCCOPY); else { pDC->StretchBlt(nXpos, 0, m_nSplitterWidth, rc.Height()/2-25, &compDC, 0, 0, 7, 7, SRCCOPY); pDC->StretchBlt(nXpos, rc.Height()/2+25, m_nSplitterWidth, rc.Height()/2-24, &compDC, 0, 0, 7, 7, SRCCOPY); //button=================================================================================== if(m_bOver && m_nCurY == -2) { pDC->StretchBlt(nXpos, rc.Height()/2-25, m_nSplitterWidth, 50, &compDC, 0, 15, 7, 8, SRCCOPY); if(m_nCx[0] == 0) pDC->StretchBlt(nXpos, rc.Height()/2-4, m_nSplitterWidth, 8, &compDC, 14, 15, 7, 8, SRCCOPY); else pDC->StretchBlt(nXpos, rc.Height()/2-4, m_nSplitterWidth, 8, &compDC, 7, 15, 7, 8, SRCCOPY); } else { pDC->StretchBlt(nXpos, rc.Height()/2-25, m_nSplitterWidth, 50, &compDC, 0, 7, 7, 8, SRCCOPY); if(m_nCx[0] == 0) pDC->StretchBlt(nXpos, rc.Height()/2-4, m_nSplitterWidth, 8, &compDC, 14, 7, 7, 8, SRCCOPY); else pDC->StretchBlt(nXpos, rc.Height()/2-4, m_nSplitterWidth, 8, &compDC, 7, 7, 7, 8, SRCCOPY); } } nXpos += m_nSplitterWidth; }
//横条 nYpos = 0; for(int i = 0;i < m_nRows - 1;i ++) { nYpos += m_nCy[i]; //pDC->Rectangle(0, nYpos, rc.Width(), nYpos+m_nSplitterWidth); if(!m_bHasBtn) pDC->StretchBlt(0, nYpos, rc.Width(), m_nSplitterWidth, &compDC, 7, 0, 7, 7, SRCCOPY); else { pDC->StretchBlt(0, nYpos, rc.Width()/2-25, m_nSplitterWidth, &compDC, 7, 0, 7, 7, SRCCOPY); pDC->StretchBlt(rc.Width()/2+25, nYpos, rc.Width()/2-24, m_nSplitterWidth, &compDC, 7, 0, 7, 7, SRCCOPY); //button=================================================================================== if(m_bOver && m_nCurX == -2) { pDC->StretchBlt(rc.Width()/2-25, nYpos, 50, m_nSplitterWidth, &compDC, 0, 30, 4, 7, SRCCOPY); if(m_nCy[0] == rc.Height()-m_nSplitterWidth-20) pDC->StretchBlt(rc.Width()/2-4, nYpos, 8, m_nSplitterWidth, &compDC, 13, 30, 8, 7, SRCCOPY); else pDC->StretchBlt(rc.Width()/2-4, nYpos, 8, m_nSplitterWidth, &compDC, 5, 30, 8, 7, SRCCOPY); } else { pDC->StretchBlt(rc.Width()/2-25, nYpos, 50, m_nSplitterWidth, &compDC, 0, 23, 4, 7, SRCCOPY); if(m_nCy[0] == rc.Height()-m_nSplitterWidth-20) pDC->StretchBlt(rc.Width()/2-4, nYpos, 8, m_nSplitterWidth, &compDC, 13, 23, 8, 7, SRCCOPY); else pDC->StretchBlt(rc.Width()/2-4, nYpos, 8, m_nSplitterWidth, &compDC, 5, 23, 8, 7, SRCCOPY); } } nYpos += m_nSplitterWidth; }
//交叉块 nXpos = 0; nYpos = 0; for(int i = 0;i < m_nRows - 1;i ++) { nYpos += m_nCy[i]; //pDC->Rectangle(0, nTemp, rc.Width(), nTemp+m_nSplitterWidth); for(int j = 0;j < m_nColumns - 1;j ++) { nXpos += m_nCx[j]; //pDC->Rectangle(nXpos, nYpos, nXpos+m_nSplitterWidth, nYpos+m_nSplitterWidth); pDC->StretchBlt(nXpos, nYpos, m_nSplitterWidth, m_nSplitterWidth, &compDC, 14, 0, 7, 7, SRCCOPY); nXpos += m_nSplitterWidth; } nYpos += m_nSplitterWidth; nXpos = 0; } //pDC->SelectObject(pOldPen); //pDC->SelectObject(pOldBrush); compDC.DeleteDC(); bitmap.DeleteObject(); ReleaseDC(pDC);}

 在OnInitDialog()中做如下初始化

 CRect rc;
 this->GetClientRect(&rc);
 if(!m_splitter.CreateSplitter(2, 2, rc, this, CSize(100, 100)))
  return false;
 m_splitter.SetPaneInfo(0, 0, CSize(100, 150), GetDlgItem(IDC_EDIT1));
 m_splitter.SetPaneInfo(0, 1, CSize(100, 150), GetDlgItem(IDC_EDIT2));
 m_splitter.SetPaneInfo(1, 0, CSize(100, 150), GetDlgItem(IDC_EDIT3));
 m_splitter.SetPaneInfo(1, 1, CSize(100, 150), GetDlgItem(IDC_EDIT4));

 

 在OnInitDialog()中做如下初始化

 CRect rc;
 this->GetClientRect(&rc);
 if(!m_splitter.CreateSplitter(1, 2, rc, this, CSize(100, 100)))
  return false;
 if(!m_splitter1.CreateSplitter(2, 1, rc, this, CSize(100, 100)))
  return false;
 if(!m_splitter2.CreateSplitter(2, 1, rc, this, CSize(100, 100)))
  return false;
 m_splitter.SetPaneInfo(0, 0, CSize(200, 0), CWnd::FromHandle(m_splitter1.m_hWnd));
 m_splitter.SetPaneInfo(0, 1, CSize(0, 150), CWnd::FromHandle(m_splitter2.m_hWnd));
 m_splitter1.SetPaneInfo(0, 0, CSize(200, 200), GetDlgItem(IDC_EDIT1));
 m_splitter1.SetPaneInfo(1, 0, CSize(0, 0), GetDlgItem(IDC_EDIT2));
 m_splitter2.SetPaneInfo(0, 0, CSize(100, 300), GetDlgItem(IDC_EDIT3));
 m_splitter2.SetPaneInfo(1, 0, CSize(0, 0), GetDlgItem(IDC_EDIT4));